The hunting longbow was the most advanced and innovative invention of its day.
Equally silent, stealthy, simple and utterly lethal.
Whoever created the bow and arrow, surely had no idea how they were carving out the future of humanity.
This clever tool became the standard for long-range hunting and combat for thousands of years.
And it is still to this day and is still widely used.
So whether you plan to learn how to make longbow for survival purposes or just because it’s badass, it’s worth the time and effort to learn.
Just follow this detailed guide on how to make a longbow and soon you’ll be notching and drawing one made with your own hands.
Longbow Article Table of Contents
To give you an idea of what we are going to cover in detail in this article here is the table of contents of what we are going to cover.
- Key Bow Making Terms
- Materials and Tools You Will Need
- Getting Started
- Picking the Right Type of Wood
- Choosing the Right Tree
- Chunking off Staves
- Shaving the Stave
- Drying and Shaping the Stave
- The Art of Tillering
- The Final Word
Key Longbow Making Terms
- Bow’s Back: The side of the bow that faces the target.
- Bow’s Belly: The side of the bow facing the sting.
- Set: Bend in limbs when a bow is unstrung and relaxed.
- Limbs: The parts of the bow on either side of the handle
- Tiller: The shape of the limbs as they bend.
- Tillering: Shaping the bow to have the desired curvature when drawn back.
What You Need To Make A Longbow
Making a bow is no simple endeavor. Some of these resources are optional, of course.
Hunter-gatherers and Ute tribesmen did not have fancy drawknives, shellac or fletching jigs, yet they built wonderfully functional longbows.
But the fewer tools you choose to use, the harder and more painstaking this project becomes.
Some of these resources are necessary – those with marked with *s. Make sure you have what you need before getting started.
- Time * – Do not kid yourself. This project isn’t the kind of project you are going to be able to knock out some lazy afternoon after a long day at the office. It’s a time-consuming, highly involved undertaking. Make sure you have the time to invest. Otherwise, your bow will be half-assed and likely useless.
- Wood and materials
- Tree Trunk/Pole * – This can be ordered at a lumber or hardware store, collected in the woods, or bought online. There are some places where one can acquire this essential piece. Choosing the right type of wood to use can be difficult, but we’ll get to that later.
- A 2X4 – The wooden block should measure about 40” in length (no shorter than 30”).
- 2 to 4, 40 Watt Light Bulbs
- Several Pieces of Plywood
- Parachute Chord – Eventually, you’ll string your bow with this, but not for archery purposes.
- Bowstring * – B-50 bowstring material (or your preference).
- Shellac *
- Gorilla Glue (or another type of wood glue).
- Finish – Choose the color yourself.
- Satin, and clear polyurethane.
- Tools (one can build a bow with nothing more than a hatchet, but it is significantly easier to use specific tools):
- Hatchet *
- Drawknife * – This is probably the most important tool you will use while building your bow, so don’t skimp on this. You can buy a decent one for $45, and the middle-shelf draw knives will be even cheaper.
- Rasps * (hoof/farriers, Nichelson #49 & 5#50)
- Cabinet Scraper * – You may not HAVE to use this, but it could come in useful.
- Pocketknife – hopefully you already own one of these tools. If you don’t: get out there and buy one! Pocket knives are unbelievably versatile tools.
- Sandpaper * – 80-, 150-, and 220-grit.
- File * – Chainsaw files will work best because of their small, detailed function.
- Vice – Most woodworking projects require that you use a vice at some point or another. These are available at several retailers; you should have no problem finding one of these.
- Sledgehammer *
- Wedges *
Getting Started: Making Your Longbow
The more effort you put into the design and construction of your bow the better the outcome. Patience and meticulousness will help to improve the results of your labors exponentially. Toys are easy to build, but useful survival tools are often difficult.
Wood longbows are traditionally fashioned from of the core of trees.
It takes a lot of attention to detail and patience to shave away one growth layer at a time, but it is how you create a flexible and functional bow shaft.
There are several steps involved in making a longbow, so prepare yourself:
Picking the Right Type of Wood
Opinions differ on what is the best wood to make a bow. There is a degree of personal preference involved in selecting the right wood for you.
It depends upon your skills as a carpenter, experience with the tools, or size, strength, skill as an archer, body type. Here is a list of different types of wood that are up for the job:
- Yew – Very popular for centuries throughout Europe, this lightweight wood is good for simple, short-lived bows with a light draw weight. Yew is the only non-hardwood that is suitable for creating bows, and it is one of the best! Yew is good for beginners because it usually has fewer knots.
- Elm – Creates short, stout bows with thick limbs. Similar to Yew, the bows Elm yields are short-lived and have a lighter draw weight than other woods.
- White Ash – Yields shorter, stouter bows that are less climate-sensitive and last a little longer. Has a moderate draw-weight, but is prone to compression cracks on the belly of the bow.
- Oak (White Oak/Red Oak)
- Elm (American Elm/ Red Elm)
Picking the Right Tree
This step is just as important as selecting the right wood. If you choose a short, stumpy, knotted section of some timberline defect, the results will be disastrous.
Here are some criteria to follow when selecting the right tree:
- 6-8 feet of straight trunk section.
- The tree’s bark runs vertically without “spiraling”.
- As few knots, limbs, bumps or swales as possible (ideally none).
As soon as you cut the tree and remove your desired section, it is best to coat the wood with shellac or wax to prevent any cracking and to avoid rot when brought inside.
Splitting off Staves
Apparently, you cannot just stain and string an 8-inch diameter log and call it a longbow.
The wood must be divided into staves first, and an 8” diameter will roughly produce six bow staves (so don’t worry if you mess up on the first one… or two).
If you have a circular saw and something similar you can kerf the log to ensure it splits along exactly the right lines.
With the wedges and hammer split the log lengthwise until you have some staves that are larger than the intended, finished length – roughly 2-3” in diameter.
Once again, as soon as you have these staves split, shellac them to prevent cracking.
Shaving The Staves
The first part of shaving your staves is to note the growth rings: summer growth rings are fatter and more distinct, and winter growth rings are small denser laminations.
You will want to select a summer growth ring for the belly of the bow.
Secure your stave in the vice and begin to draw off layers. Shave away wood until you have reached the winter growth ring just above the summer ring you have selected for the belly.
Pare away this final growth ring with the cabinet scraper, following the growth ring from one end of the stave to the other.
The more precise you are with this step, the better off you will be down the line, so take care to shave, draw, and pare as carefully as possible.
Once finished, shellac the stave to prepare it and protect it from cracking during the next step.
Drying And Shaping The Stave
Pare the stave with a hatchet and drawknife so that it is only slightly larger than the intended product. Shellac the back.
You can build your drying box out of a few pieces of plywood and a couple of 40-watt light bulbs.
A drying box is a relatively easy device to build, and it is pretty cheap for what a difference it makes.
Drying on a shelf in the garage will do, but you probably will not be able to get the wood as close to the desired moisture content.
Now comes the tough part: testing your patience.
The stave should dry for 3-4 weeks at the minimum, and some bow makers even suggest you let the wood dry for an entire year.
Regardless of how long you let the bow sit, when you pull it out, it should be around 15% moisture content (8% is ideal). Moisture measuring devices can be purchased at almost any hardware store.
When the time has finally come to move on with the project, extract your stave from wherever it was drying and very carefully draw the outline of your finished bow onto the stave with a marker.
On Native American bows, the center 8” is narrower than both the limbs for the handle, and the belly tapers off at the end of the limbs. Mark the shape you want to cut out.
Using the drawknife, reduce the stave to your drawn outline and refine the form with a pocketknife to get the final details.
Lightly sand the edges and tips and smooth out the front and back surfaces. Finally, using a chainsaw file, create two deep 45-degree notches on either end of the bow for the string.
The Art Of Tillering
That’s right. It is an ART.
And it is perhaps one of the most important steps in this project. When you look at an unstrung longbow, it is not straight like your staves.
It is curved slightly. Tillering is the method by which you achieve that curve.
Start by removing wood from the belly with a file and cabinet scraper until the libs are thin enough to start bending.
Floor Tillering – Holding one tip in hand, and resting the other on the floor securely against your foot. At first bend, the bow gently to test the flexibility.
Begin to shave off small amounts of wood between each bending session, creating more and more arc. But be VERY CAREFUL not to crack the stave – otherwise, start starting over.
As you do this, keep a wary eye open for any flat spots or points of resistance and shave them away.
The amount of wood you shave off should get increasingly smaller as you get closer to a finished product. Inspect regularly along the process for any cracks or imperfections – if anything but small cracks on the back develops you will have to start from scratch.
Once the bow is bent enough to string, bust out that hemp or parachute cord and tie off.
There should be about seven inches between the bow’s belly and the string on a properly strung bow.
Tiller Tree – This is why you need a 2×4. Stand the block up on one end and use a file or saw to create angled notches every inch or half-inch along the long side. Here is an image of a tiller tree.
Fasten the tiller tree upright against a wall and place the belly of your strung bow on the top.
Carefully start to draw the string and rest it in the tiller tree’s notches to gradually increase the draw of your bow. Leave the string on each level for a few minutes so the wood can adjust.
A typical draw length is about 28-inches, so when your bowstring hits the 28-inch mark on the tiller tree, you should be good to go. Once again, shave away any flat or compromised points of weakness as you do this.
The end goal of tillering is to create a perfectly even bend in both limbs. Once this has been achieved, take the bow and draw it in front of the mirror. Do this repeatedly until you identify which of the two limbs is the stiffer one. The stiffer one should become the bottom of your longbow.
Use your file to create a small indentation on the handle for the arrow (right or left depending on which hand you shoot with).
Finishing Your New Longbow
Sand the entire bow with 80-, 150-, and 220-grit sandpaper and shellac one more time for good measure.
At this point, you can decide if you want to finish your bow or not.
It is a personal choice, but remember, the darker the color of your weapon, the harder it will be to spot in the brush or woods.
Seal with three coats of clear gloss polyurethane and one final coat of satin polyurethane.
Wrap your handle in nylon cord, hemp cord, or leather chord using the “whipping” technique. Apply a light coat of clear glue (like Tightbond III) and let it dry.
Finally, you can string your bow with an actual bowstring, and you are ready to get out there. You have a completed, one-of-a-kind handmade hunting longbow – enjoy!
The Final Word
There is nothing quite as satisfying as hunting live game with a longbow you made with your own bare hands. It is a very human experience. But more importantly, it’s a survival skill once mastered, can never be taken away from you.
Even if you are not into hunting, using a handmade custom bow to practice archery is ideal for survival.
It is the original long-range weapon and a tool that helped our species proliferate from a few small bands of wandering tribes into the great and comprehensive society we live in today.
It may also be a weapon that keeps your family safe if society collapses back into ancient times.
Nick C. – Elite Survival Club
|P.S. If you haven’t already, join my Inner Circle group on Facebook to gain access to exclusive stuff. I am giving away membership for a limited time, please take this chance to join us before its too late.|